Acer Ferrari 3200 User Manual

65

E

ng

lish

E

ngl
is

h

Frequently asked questions

This section suggests solutions to commonly encountered problems.

I press the power button, but my computer does not start or boot-up.

Look at the Power status indicator:

•

If it is not lit, no power is being delivered to the computer. Check 
the following:
-

If you are running on battery power, the battery may be low 
and unable to power the computer. Connect the AC adapter 
to recharge the battery pack.

-

If you are running on mains power, make sure that the AC 
adapter is properly plugged in to the computer and to the 
power outlet.

•

If it is lit, check the following:
-

Make sure that there is not a non-bootable (non-system) 
diskette in the floppy disk drive. If so, remove the diskette and 
then press Ctrl-Alt-Del to restart the system.

Nothing appears on the screen.

The computer's power management system automatically blanks the 
screen to save power. Press any key to turn the display back on.

If pressing a key does not turn the display back on, check the 
following:

•

The brightness level might be too low. Press Fn + 

→

 hot key to 

increase the screen brightness level.

•

The display device might be set to an external monitor. Press the 
Fn + F5 hot key to toggle the display setting.

•

The system may be in standby mode. Try pressing the power 
button to resume.

The image is not full-screen.

Make sure that the resolution is set to a resolution your system 
supports:

•

Right click on your Windows desktop and select Properties to bring 
up the Display Properties dialog box. Alternatively, click on the 
Display icon in Control Panel.

•

Click on the Settings tab to check the resolution setting. 
Resolutions lower than the specified resolution result in a display 
that is less than full-screen.