Packard Bell B3 User Manual

6

Note: The WLAN card has 2 connectors: MAIN and AUX. Please be sure to connect the
antenna to the MAIN connector when re-assembling the WLAN card!

To remove the keyboard, perform the following steps:

1.  Remove the 3 screws located in the battery compartment (

2.  Push up the keyboard cover in the area indicated with the 2 arrows in

.

3.  Remove the 3 screws securing the keyboard shown in

.

4.  Gently lift out the keyboard.
5.  To disconnect the flat cable, loosen the clip and slide out the cable (