Panasonic CF-W5 User Manual

13

Slide and hold the power switch 

 for approximately one second until the 

power indicator 

 lights.

z

Do not slide the power switch repeatedly.

z

The computer will forcibly be turned off if you slide and hold the power switch for 

four seconds or longer.

z

Once you turn off the computer, wait for ten seconds or more before you turn on 

the computer again.

z

Do not perform the following operation until the hard disk drive indicator 

 turns off.

• Connecting or disconnecting the AC adaptor

• Sliding the power switch or CD/DVD drive power/open switch

• Touching the keyboard or touch pad

• Closing the display

z

Do not change the Setup Utility until completing step 5. If you do so, Windows 

setup may not operate properly.

Follow the on-screen instructions.

z

The computer will restart after the setup is complete.
To go to the next step, wait until the hard disk drive indicator 

 has turned 

off.

z

When you set date/time/time zone and click [Next], the screen may not go to the 

next step for a few minutes. Do not touch the keyboard or touch pad, and wait 

until the screen changes.

Click [start] - [Control Panel] - [User Accounts] - [Create a new account].

z

Remember your password. If you forget the password, you cannot use the Windows 

operation system. Creating a password reset disk beforehand is recommended.

Î

 

 Reference Manual “CD/DVD Drive”

z

You can select the Classic view of Control Panel or the Classic Start menu. You can also change the way a user logs 

on or off. This manual explains using the Windows XP default setting (not Classic view or Classic Start menu etc.).

z

You can update to the latest patches and service packs for Windows with the following menus. 

[start] - [All Programs] - [Windows Update]

z

If the message “Your computer might be at risk” is displayed
Select 

 (red icon) on the notification area and make the appropriate settings. The Windows Security Center reg-

ularly gives you notice so that you can make the optimum settings. This is not an error message and you can use the 

computer. However, making appropriate measures is recommended to reduce the risk of virus and other attacks.

z

You may hear a mechanical “click” shortly after the hard disk drive indicator has turned off when there has been no 

input from a key or device operation, when the computer enters the standby or hibernation mode, or when Windows 

is shut down. This is the sound of the head shifting positions, to reduce power consumption or to protect the hard 

disk from shocks. This sound does not indicate a malfunction.

z

In the following situations, the motor from the CD/DVD drive can be heard.

• Immediately after the computer or CD/DVD drive is turned on

• When a CD or DVD is playing

The sounds you hear are normal operating sounds created by the motor in the CD/DVD drive operating; it is not a 

malfunction.