Panasonic UB-7325 User Manual

Tighten the film, then close the printer door.

1) Rotate the blue gear in the direction of the 

arrow to take up the slack on the film.

• If a slack remains, perform step 3-2) through 

4-1) again.

2) Securely close the printer door by using both 

hands until a click is heard.

• “

” flashing on the Multi-Copy/Error 

Indicator will go out.

• If “

” is still flashing after closing the printer 

door, make sure that the thermal transfer film 
has been installed properly and tightened.

• The printer door should be closed to make 

copies properly. Confirm both latches are 
locked.

It is possible to load up to 40 sheets of Letter size 
copy paper [assuming a paper weight of 80 g/m

2

 

(20 lb.)].
Note that only Letter size paper may be used.
When the unit is first used or when “

” flashes on the 

Multi-Copy/Error Indicator to indicate that the unit is 
out of paper, load copy paper as described below.

Follow the guidelines below to ensure smooth and 
accurate printing by the unit.

• Only use Letter size copy paper having a weight of 

60 g/m

2 

(16 lb.) to 90 g/m

2

 (24 lb.) as the copy paper 

for this unit.

• Do not simultaneously load paper of varying type 

and thickness as this may result in paper jams.

• Before adding copy paper, be sure to remove all the 

copy paper remaining inside the unit’s paper cover. 
(Note that copy paper will slightly resist being 
removed, but may be pulled out without problems.)
After removing the copy paper, stack the removed 
paper together with the new paper, fan it thoroughly, 
square it and reload.

• Extremely smooth or glossy paper

• Coated paper

• Thermal paper

• Paper that is printed on one side

• Wrinkled paper, creased paper, etc.

Set the power switch to on ( I ).

• “

” will flash on the Multi-Copy/Error 

Indicator when copy paper has run out.

• The screen will move to home position and 

stop.

Blue gear

Latches

ON

OFF