Panasonic UB-5315 User Manual
Installing the Thermal Transfer Film
11
Eng
lish
3) Place the blue gear on the front right groove.
4) Place the white shaft on both sides of the back
grooves.
4
Tighten the film, then close the printer door.
1) Rotate the blue gear in the direction of the arrow
to take up the slack on the film.
• If a slack remains, perform step 3-2) through 4-1) again.
2) Securely close the printer door by using both
hands until a click is heard.
• “
” flashing on the Multi-Copy/Error Indicator will go
out.
• If “
” is still flashing after closing the printer door,
make sure that the thermal transfer film has been
installed properly and tightened.
installed properly and tightened.
• The printer door should be closed to make copies
properly. Confirm both latches are locked.
Blue gear
White shaft
Blue gear
Latches
Notes