Panasonic CF-19 series User Manual
12 Turn on the computer, and press
F2
several times while [Panasonic] boot screen is dis
played.
The Setup Utility starts up.
If the password is requested, enter the Supervisor Password.
13 Press
F9
.
At the confirmation message, select [Yes] and then press
Enter.
The Setup Utility settings excluding the password(s) will return to the default values.
14 Select the [Exit] menu and then select [Save Current Values], then press
Enter
.
At the confirmation message, select [Yes] and press
Enter.
15 Turn the computer off by using the power switch.
If additional instructions are included with the computer, be sure to read them. It may be necessary to per
form additional operations during the following procedure.
form additional operations during the following procedure.
16 Perform
the
first-time operation ( page 13).
17 Start the Setup Utility and change the settings as necessary.
Useful Information
23