Panasonic CF-Y7 User Manual

31

If the hardware installed in this computer is not operating properly, you can use the PC-Diagnostic Utility to determine 

whether or not there is a problem. 

If the utility discovers a problem in the hardware, contact your technical support office.

Hardware below can be checked using this utility. (Software cannot be checked.)

CPU
Memory
Hard Disk
CD/DVD Drive
Video Controller
Sound

*1

Modem
LAN
Wireless LAN

*2

Wireless WAN

*3

Bluetooth

*4

USB
PC Card Controller
SD Card Controller
Keyboard
Touch Pad

*1

When the PC-Diagnostic Utility is running, a loud beep will sound, so do not use headphones at this time. (The beep will not 

sound if mute is using Windows.)

*2

Only for model with wireless LAN

*3

Only for model with wireless WAN

*4

Only for model with Bluetooth

When the video diagnostic check is running, the display may be distorted, and when the audio diagnostic check is 

running, sounds may be generated from the speakers. These are not malfunctions. 

For the hard disk only, you can select standard diagnostic check or extended diagnostic check.

When the PC-Diagnostic Utility starts up, it will run the standard diagnostic check. 

We recommend that you use the touch pad for operations. When not using the touch pad, you can operate using the 

internal keyboard instead. 

If the touch pad does not operate properly, press Ctrl + Alt + Del to restart the computer, or slide the power switch 
to turn the power off, and then restart the PC-Diagnostic Utility. 

Run this utility using the default settings in the Setup Utility. 
If the Setup Utility or other settings will not allow a hardware to be executed, the hardware icon will be displayed in gray.

During the diagnostic check, do not remove the AC adaptor, or attach any peripheral devices.

F2

The Setup Utility starts up.

If the password is requested, enter the Supervisor Password.
If you are using the computer after changing the settings from the status at the time of purchase, we recom-
mend that you make a note of the settings that are changed.

Operations

Touch pad operations

Internal keyboard operations

Select icon

Place the cursor above the icon

Press Space and then press      
(

(close) cannot be selected)

Click the icon

Tap or click (right click cannot be used)

Press Space above the icon

Complete the PC- Diagnos-
tic Utility and then restart 
the computer

Click (close) 

Press Ctrl + Alt + Del.