Advantech IPPC-9150 User Manual
Chapter 9 Award BIOS Setup
121
Your system supports five modes, numbered from 0 through 4, which
differ primarily in timing. When "Auto" is selected, the BIOS will
choose the best available mode.
differ primarily in timing. When "Auto" is selected, the BIOS will
choose the best available mode.
The options are: Auto, (Default), Disabled.
Primary/Secondary Master/Slave Ultra DMA
DMA means Direct Memory Access. Ultra DMA is faster than DMA.
DMA is a method of transferring data to or from memory at a fast
rate, without involving the CPU.
DMA is a method of transferring data to or from memory at a fast
rate, without involving the CPU.
When you select "Auto", the BIOS will choose the best available
mode.
mode.
The options are: Auto (Default), Disabled.
Onboard FDD Controller
When enabled, the floppy disk drive (FDD) controller is activated.
The options are: Enabled (Default), Disabled.
Onboard Serial Ports 1 & 2
If the serial ports use the onboard I/O controller, you can modify your
serial port address.
serial port address.
The options for Port 1 are: 3F8 (Default), 2E8, Disabled, 2F8, 3E8.
The options for Port 2 are: 2F8/IRQ3 (Default), 3E8/IRQ4, 2E8/IRQ3,
Disabled, 3F8/IRQ4.
Disabled, 3F8/IRQ4.
Onboard Serial Ports 3 & 4
If the serial ports use the onboard I/O controller, you can modify your
serial port address.
serial port address.
The options for Port 3 are: 3E8 (Default), 2E8, 2F8, 3F8, Disabled.
The options for Port 4 are: 2E8 (Default), Disabled, 3E8, 2F8, 3F8.
Onboard Parallel Port
If the parallel port uses the onboard I/O controller, you can modify
your parallel port paramaters. When you select "Disabled", the next
two setup items will disappear.
your parallel port paramaters. When you select "Disabled", the next
two setup items will disappear.