Panasonic CF-52 Series User Manual

<Only for model with wireless LAN, Bluetooth and/or wireless WAN>
There are three ways of disabling and enabling wireless communication. 
z

The wireless switch on the front of the computer (below) 

z

The wireless switch utility (

)

z

Settings in the [Advanced] menu of the Setup Utility (

z

For further information about Wireless LAN: 

z

For further information about Bluetooth: 

z

For further information about Wireless WAN: Refer to the instruction manual of the wireless device.

„

„

z

In the default setting, the wireless switch enables all wireless devices when it is set to ON.

z

If you uninstall the Wireless Switch Utility, set the wireless switch to ON.

z

Do not turn on/off the switch repeatedly at too short intervals.

z

Do not restart, log off, or enter standby or hibernation immediately after turning on/off the switch.

z

Do not turn on/off the switch while Windows is starting up.

z

To use wireless communication, set the wireless devices ([Wireless LAN] / [Bluetooth] / [Wireless WAN]) to [Enable] 
(default) in the [Advanced] menu of the Setup Utility (

z

When you set [Wireless Switch] to [Disable] in the [Advanced] menu of the Setup Utility (

), the Wireless 

Switch Utility icon will not appear in the notification area. All wireless equipment (Wireless LAN, Bluetooth, Wireless 
WAN) will remain ready irrespective of the wireless switch setting.

z

It may take some time to turn off wireless communication after switching the wireless switch off.

z

If the IEEE802.11a setting is changed in [Device Manager] (

), the display will be changed accordingly.

z

You can check the wireless LAN communication status in Intel

®

 PROSet/Wireless Software. Perform either of the fol-

lowing procedures.

• Double-click 

, 

, 

, or 

 on the notification area.

• Click [start] - [All Programs] - [Intel PROSet Wireless] - [Intel PROSet Wireless].