Advantech ARK-7480 User Manual

Page of 104
ARK-7480 User Manual
50
4.5.3 Active to Precharge Delay
The default setting for the Active to Precharge Delay is 7.
4.5.4 DRAM RAS# to CAS# Delay
This option allows you to insert a delay between the RAS (Row Address 
Strobe) and CAS (Column Address Strobe) signals. This delay occurs 
when the SDRAM is written to, read from or refreshed. Reducing the 
delay improves the performance of the SDRAM.
4.5.5 DRAM RAS# Precharge
This option sets the number of cycles required for the RAS to accumulate 
its charge before the SDRAM refreshes. The default setting for the Active 
to Precharge Delay is 3.
4.5.6 DRAM Data Integrity Mode
Select ECC if your memory module supports it. The memory controller 
will detect and correct single-bit soft memory errors. The memory con-
troller will also be able to detect double-bit errors though it will not be 
able to correct them. This provides increased data integrity and system 
stability.
4.5.7 MGM Core Frequency
This field sets the frequency of the DRAM memory installed. The default 
setting is Auto Max 266MHz.
4.5.8 System BIOS Cacheable
The setting of Enabled allows caching of the system BIOS ROM at 
F000h-FFFFFh, resulting in better system performance. However, if any 
program writes to this memory area, a system error may result.
4.5.9 Video BIOS Cacheable
The Setting Enabled allows caching of the video BIOS ROM at C0000h-
F7FFFh, resulting in better video performance. However, if any program 
writes to this memory area, a system error may result.
4.5.10 Memory Hole At 15M-16M
In order to improve performance, certain space in memory can be 
reserved for ISA cards. This memory must be mapped into the memory 
space below 16 MB. The choices are Enabled and Disabled.
4.5.11 Delayed Transaction
The chipset has an embedded 32-bit posted write buffer to support delay 
transactions cycles. Select Enabled to support compliance with PCI spec-
ification version 2.1.
4.5.12 Delay Prior to Thermal