Panasonic CF-74CCBAXBM User Manual

10-8

n

n

n

n

1. Attach the four LCD Damper C to the upper part and lower part of the LCD Unit.
2. Attach the LCD Damper D to the upper center of the LCD Unit.

n

n

n

n

1. Connect the LCD/TS Cable (LCD) to the Connector on the LCD Unit.
2. Connect the LCD/TS Cable (TS) to the Connector (CN603) on the TS PCB.

A: Match the LCD Damper C by LCD edge 0~2mm

A

A

A

LCD Damper D

LCD Unit

LCD Display Side

LCD Rear Side

0~1mm

LCD Damper C

Match the LCD Damper D to the center 
of the LCD Unit.

LCD Damper C

0~1mm

Cushion

A: Match the Cloth by Cushion edge 0~1mm

A

A

Cloth

Cloth

TS PCB

LCD Unit

Cloth

Cloth

Cloth

Cloth

Cushion

Match the end of 
the Cloth to the end 
of the Cushion.

Cloth

B

B: Attaching the Cloth

3~5mm

95~100mm

0~2mm

B

LCD/TS Cable 

EMI Sheet

Tape

Match the end of the Tape to the end of the EMI Sheet.

Attach the Cloth along 
the surface of 
the Cushion.

Fold it back and attach to the side surface.

Ensure the Cloth is surely 
attached to the metal 
chassises on both of the 
side and top. 
(The Cloth should catch 
the metal chassieses only. 
It must not catch the TAB.)

Attach the Cloth 
along the surface 
of the Cushion.

Before attaching the EMI Sheet, 
attach the Tape.

Turn them halfway. 
*Avoid too much tension 
 on the Cables.

Ensure it does not come out 
of the metal part.

Use the Cable covered 
with the Conductive Cloth only.

Ensure the corner of the Cloth 
does not come out of the LCD's edge.

Corner of the Cloth

Safety Working

Safety Working

Cover the 
Connector 
Terminals 
using the Tape.