ONKYO DS-A4 User Manual

13

■ Using Your iPod/iPhone model’s Alarm 

You can use your iPod/iPhone model’s Alarm 
Clock function to automatically turn on your 
iPod/iPhone and amp at a specified time. Your 
amp’s input source will automatically be set to 
the input to which your iPod/iPhone is con-
nected.

■ Charging Your iPod/iPhone model’s Bat-

The RI Dock charges your iPod/iPhone model’s 
battery while your iPod/iPhone is in the RI 
Dock.

If you cannot adjust the volume of your Onkyo 
component with the DS-A4’s remote controller, 
try changing its remote control ID. The default 
setting is #1.

Some Onkyo components are set to ID #2 or #3.

• While pressing and holding down the 

[SETUP] button, press one of the following 
buttons for more than 3 seconds to set the 
ID:
ID #1: PLAYLIST Up [

] button

ID #2: ALBUM Up [

] button

ID #3: PLAYLIST Down [

] button

ID #4: ALBUM Down [

] button

• This function only works when the OSD 

mode is set to Off.

• To use this function, your iPod/iPhone 

must be in the RI Dock, and the RI Dock 
must be connected to your amp with 
both an  cable and an audio cable.

• When you use this function, be sure to set 

your amp’s volume control to a suitable 
level.

• Your amp may take several seconds to 

startup, so you might not hear the first 
few seconds of the first song/video.

• To charge your iPod/iPhone battery, the 

AC adapter must be plugged into a suit-
able wall outlet and connected to the RI 
Dock’s DC IN jack.

• See your iPod/iPhone model’s instruction 

manual for more information on battery 
charging.