Epson 500 Series User Manual

C a u t i o n

When your battery can no longer be recharged, please cannot

your local government agency responsible for hazardous waste

disposal. NiCad and NiMH batteries are considered hazardous

waste and should be recycled or disposed of properly.

When the battery's power is getting low, the low battery light
starts flashing and the computer starts beeping. At this point,

replace it with a fully charged battery or  connect the AC adapter.

You need to recharge the battery (as described above) before you

can use it again to power the computer without the AC adapter.

If your AC adapter is not available, follow these steps:

1. Complete your current activity.

2. Save your data.

3. Exit the program you are using.

4. Turn off the computer.

Once your computer starts beeping, you have approximately two

minutes to save your data. If the batteries run out suddenly, you

will lose any data you have not saved.

Turn off computer before replacing the battery pack.

Otherwise, you will lose data and you may even damage the

computer.