Epson 4SLC2-50 User Manual

If you are not using a telecommunications program, you can use
the fax/modem’s built-in command set. These commands are
compatible with the Hayes

® 

Smartmodem

® 

series of modems.

Note

When you use a telecommunications software program like
BitCom or WinFax LITE, it provides its own set of commands

that control the fax/modem. You will normally use the

program’s commands instead of the built-in set. See your

software manuals for instructions. You need the following
information only if you are not using a telecommunications
program.

Your fax/modem has two operating states: command state and

on-line state. The fax/modem must be in command state to receive
commands from you; in on-line state, your keystrokes are passed
directly to the telephone line.

The fax/modem enters the command state when you:

Turn on your computer

Select the Reset command (ATZn)

Place a call but are unable to make a connection

Exit the on-line state using the escape sequence (+++).