Epson 4SLC2-50 User Manual

4. If the connector has retaining screws, tighten them by hand or

with a screwdriver.

5. Connect the other end of the cable to the printer. If the printer

interface has retaining clips, squeeze them gently until they
snap into place.

6. Connect the printer’s power cable to a grounded (earthed)

electrical socket.

You can use the 

COM 1 

and/or COM 2 port to connect serial

devices, such as a serial printer or plotter. You could also connect a
modem or pointing device, such as a trackball or mouse.

Note

You cannot use the 

COM 2 

port if the internal fax/modem is

installed.

Follow these steps to connect a serial device:

1. Make sure both computer and the serial device are off.