Epson 4SLC2-50 User Manual

4. Lift the memory module out of the computer.

5. Lower the new memory module straight down into the

computer until its connector aligns with the socket on the

system board. Make sure the hole for the attachment screw is

on your left.

6. Carefully press the module straight into the socket. The

connector and socket are designed so they fit together only if

you have aligned them correctly; so do not force them. If you

have trouble, remove the module and try again.

7. When the connector is firmly attached to the socket, replace the

screw on the left side of the module.

8. Replace the keyboard as described on page 4-18.