Epson Y16499100301 User Manual

The Equity LT parallel interface is Centronics-compatible

and uses a DB-25S connector. Most Epson printers have

parallel interfaces.

To connect a printer to the computer, you need an IBM-

compatible printer cable. If you are not sure which one you

need, consult your Epson dealer. Once you have a printer

cable, follow these steps to connect your printer to the parallel

interface on the computer:

1. Place the printer next to your computer.

2. Before you connect the printer, be sure the power switches

on the computer and printer are off.

3. Connect the appropriate end of the printer cable to the

parallel port on the back panel of the computer, as shown

below. If the plug has retaining screws, tighten them with a

small screwdriver.