Epson 386/33 PLUS User Manual

1 long; then 3 short

1 long; then 8 short

C a u s e

Error with conventional

See ‘Memory Module

or extended memory

Problems”

Failure in video RAM; or

Write down message,

vertical and horizontal

contact dealer

retrace

If your computer does not start when you turn on the power,

check the following:

1. Is the power light on? If not, remove any diskettes and

turn off the power. Make sure the power cord is securely

connected to both the AC inlet on the back panel and an

electrical outlet. Replace the system or Reference diskette,

if necessary, and turn on the computer again.

If you turn off the computer always wait at least five

seconds before turning it back on. This allows the

computer to clear and reset its memory.

2. If the power light still does not come on, check the

electrical outlet for power. Turn off your computer and

unplug the power cord from the wall outlet. Plug a lamp

into the outlet, and turn it on to see if the outlet supplies

power.

If you installed or removed any of your system

components, such as a disk drive, check to make sure you

have reconnected all the internal and external cables

correctly.