Epson 386/33 PLUS User Manual

If you added extra memory to your system by installing SIMMs

and that memory is not operating properly, check the following:

1. If the memory count displayed by the power-on

diagnostics program is incorrect, you or your dealer may

not have installed the SIMMs correctly. The SIMMs may be

installed in the wrong sockets, they may be the wrong type,

or they may not be inserted all the way into their sockets.

If your dealer installed SIMMs for you, contact your dealer;

do not attempt to correct the problem yourself. If you

installed them, see “Adding Memory Modules” in

Chapter 4 and make sure you followed all the instructions.

2. Be sure to run the SETUP program after you install or

remove memory modules to automatically update your

memory configuration. See Chapter 2 of the 

for

instructions.

3. If you are still having trouble with your SIMMs, write

down any error messages and contact your dealer.

The battery in your computer is a 3.6 volt, lithium battery. It

should last from three to five years before you need to replace

it. When the battery’s life is exhausted, you may see one of the

following error messages:

Purchase a new battery pack and follow the instructions in

Chapter 4 to install it or have your dealer to install it for you.