Psion Teklogix 7530 G2 User Manual
Chapter 5: Configuration
Protocol Tab
Protocol Tab
138
Psion Teklogix 7530 G2 Hand-Held Computer User Manual
Editing The Channel List
Only those channels that are enabled are displayed in the dropdown menus in the
Edit Channel List dialog box. The allowable values range from 0 to 20.
Edit Channel List dialog box. The allowable values range from 0 to 20.
•
Tap on the arrow next to dropdown menu to scroll through the available
channels. Highlight the value you want to assign.
channels. Highlight the value you want to assign.
•
Once you’ve assigned the switching order, tap on the OK button to close
the dialog box.
the dialog box.
The channel list is added to the selected channel in the Manual Switch Table
dialog box.
dialog box.
5.10.3 Protocol Tab
Enable Cellular Protocol
The value assigned to this parameter must be identical to the value assigned to the
corresponding parameter in the Psion Teklogix Network Controller, Wireless
Gateway or Base Station. A warm reset of the 7530 G2 is required before this
parameter can take effect.
If Enable Cellular Protocol is disabled (unchecked), the options in the Cellular
Radio Address frame are displayed in grey text indicating that they cannot
be accessed.
corresponding parameter in the Psion Teklogix Network Controller, Wireless
Gateway or Base Station. A warm reset of the 7530 G2 is required before this
parameter can take effect.
If Enable Cellular Protocol is disabled (unchecked), the options in the Cellular
Radio Address frame are displayed in grey text indicating that they cannot
be accessed.