Psion Teklogix 7530 G2 User Manual
Chapter 3: Getting To Know Your 7530 G2
Radio Traffic LED
Radio Traffic LED
44
Psion Teklogix 7530 G2 Hand-Held Computer User Manual
Table 3.1 Charge LEDs
* If the charge fails, refer to the charger troubleshooting sections in ‘Chapter 6:
3.5.1.2
Radio Traffic LED
The upper-left LED on your unit flashes either yellow or green to indicate when the
radio transmits and receives data.
radio transmits and receives data.
Note: Keep in mind that while the standard 802.11 radio supports the trans-
mit/receive LED, not all radios support this function.
Table 3.2 Transmit and Receive LEDs
3.5.1.3
Scan LED
Successful scans are indicated in two ways – with a scan LED and with an
audio tone.
audio tone.
Table 3.3 Scan LED
3.5.1.4
User Application LED
This indicator is available for user-loaded custom Windows CE applications. Your
supervisor can describe how this LED behaves with your application. Neither
Windows CE nor Open Tekterm V2.0 use this LED.
supervisor can describe how this LED behaves with your application. Neither
Windows CE nor Open Tekterm V2.0 use this LED.
Charge in progress.
LED displays solid yellow colour.
Cell temperature out of range for charge.
LED flashes yellow.
Unable to charge battery.
LED displays solid red colour.
Charge circuit failure.*
LED flashes fast red.*
Function
Radio Traffic LED Behaviour
Radio Transmit
LED flashes yellow.
Radio Receive
LED flashes green.
Function
Scan LED Behaviour
Scan in progress
LED displays solid red during scan.
Successful scan
LED displays solid green after decode.
Off when scan ended.
Off when scan ended.
Unsuccessful scan
LED flashes red.
Function
Charge LED Behaviour