Toshiba tecra m1 User Manual

 

To check if the SD card/Smart Media slot is good or no good, follow the troubleshooting 
procedures below as instructed. 

Procedure 1:  Check on Windows 
Procedure 2:  Connector/Replacement Check 

Insert an SD card into the slot. Check if the installed Windows recognizes automatically the 
SD card and the data in the SD card can be read. 

If the card is not recognized or data are not red, go to Procedure 2. 

The SD card is connected to PJ1514 on the system board. 

 

Check 1  The SD card and the system board may be disconnected. Make sure the SD card is 

firmly inserted to PJ1514 on the system board. If not, insert it firmly. If the SD 
card is still not functioning properly, perform Check 2. 

Check 2  The SD card may be faulty. Replace it with a new one following the step in 

Chapter 4. If the problem continues, perform Check 3. 

Check 3  The system board may be faulty. Replace it with a new one following the step in 

Chapter 4. 

2-61