Toshiba X300 User Manual

User’s Manual

4-53

Operating Basics

2. Plug one end of the cable into the LAN jack. Press gently until you hear 

the latch click into place.

3. Plug the other end of the cable into a LAN hub connector or router. 

Check with your LAN administrator and hardware or software vendor 

before using or configuring a network connection.

To disconnect the LAN cable, follow the steps as detailed below:

1. Pinch the lever on the connector in the computer’s LAN jack and pull 

out the connector.

2. Disconnect the cable from the LAN hub or router in the same manner. 

Check with your LAN administrator and hardware or software vendor 

before disconnecting from the hub.

This section explains computer handling and maintenance.

To help ensure long, trouble-free operation, keep the computer free of dust 

and dirt, and use care with all liquids around it.

■

Be careful not to spill liquids into the computer. If the computer does get 

wet, turn the power off immediately and let the computer dry completely - 

in these circumstance you should get the computer inspected by an 

authorized service provider in order to assess the scope of any damage.

LAN Jack

LAN active indicator

(yellow)

LAN Indicator (green)

LAN Cable

When the computer is exchanging data with the LAN, the LAN Active 

is not exchanging data, the Link indicator glows.

Make sure the LAN Active indicator (yellow LED) is out before you