Toshiba U500 User Manual
60
Getting Started
Adding memory (optional)
3
Gently lift the memory module to a 30-degree angle and slide it
out of the slot.
out of the slot.
(Sample Illustration) Removing the memory module
4
Replace the memory module slot cover and secure it using the
screws.
screws.
5
Re-insert the main battery. For more information on inserting
the main battery, see
the main battery, see
.
6
Turn the computer right side up. Be sure to remove the soft
cloth from the work surface before restarting the computer.
cloth from the work surface before restarting the computer.
Always make sure your computer and AC adaptor have adequate
ventilation and are protected from overheating when the power is turned
on or when an AC adaptor is connected to a power outlet (even if your
computer is in Sleep mode). In this condition, observe the following:
ventilation and are protected from overheating when the power is turned
on or when an AC adaptor is connected to a power outlet (even if your
computer is in Sleep mode). In this condition, observe the following:
❖
Never cover your computer or AC adaptor with any object.
❖
Never place your computer or AC adaptor near a heat source,
such as an electric blanket or heater.
such as an electric blanket or heater.
❖
Never cover or block the air vents including those located at the
base of the computer.
base of the computer.
❖
Always operate your computer on a hard flat surface. Using your
computer on a carpet or other soft material can block the vents
located at the base of the computer.
computer on a carpet or other soft material can block the vents
located at the base of the computer.
Overheating your computer or AC adaptor could cause system
failure, computer or AC adaptor damage or a fire, possibly resulting
in serious injury.
failure, computer or AC adaptor damage or a fire, possibly resulting
in serious injury.
Front of computer
Slot B
Slot A