Toshiba TECRA S3 User Manual

User’s Manual

4-13

Operating Basics

Inserting a module

Insert the Ultra Slim Bay HDD adaptor as described below.

1. Insert the Ultra Slim Bay HDD adaptor in the computer as shown below 

and press until the ejector clicks.

2. If you want to lock the Ultra Slim Bay HDD adaptor, set the Ultra Slim 

Bay lock screw in the hole for the lock position (

➁). The lock screw is 

inserted in the unlock position (

➀) at the time of purchasing.

Using optical media drives

The text and illustrations in this section refer primarily to the optical media 
drive. However, operation is the same for other optical drive in the Ultra 
Slim Bay. The full-size drive provides high-performance execution of CD/
DVD-ROM-based programs. You can run either 12 cm (4.72") or 8 cm 
(3.15") CD/DVDs without an adaptor. An ATAPI interface controller is used 
for CD/DVD-ROM operation. When the computer is accessing a CD/DVD-
ROM, an indicator on the drive glows and the Ultra Slim Bay indicator 
glows.

If you have a DVD-ROM&CD-R/RW drive, refer also to the 

 section for precautions on writing to CDs.

If you have a DVD Super Multi drive, refer also to the 

 section for precautions on writing to CDs/DVDs.

Ultra Slim Bay HDD adaptor

Lock screw

When the power of the optical media drive is off, pressing the Fn + Tab 
keys will turn the power of the optical media drive on. Furthermore, it is 
possible to set it to turn the power of the optical media drive on and eject 
the tray at the same time.