Toshiba Satellite A30 Series User Manual
4.15 LED/Button Board
4 Replacement Procedures
4.15 LED/Button
Board
Removing the LED/Button Board
To remove the LED/button board, follow the steps below.
1. Remove all of the modules and the computer cover as described in previous sections.
2. Place top cover upside down.
3. Remove one M2.5x3 black screw from the LED/button board mounting bracket.
Figure 4-64 Removing the LED/button board mounting bracket screw
4. Slide the mounting bracket a little to the right, if the back of the cover faces you, and
then lift it and the board out.
Figure 4-65 Removing the mounting bracket and the board
5. Remove three M2x3 black screws from the face of the LED/button board.
Figure 4-66 The LED/button board
Satellite A30 Series Maintenance Manual
4-39