Toshiba Satellite A30 Series User Manual

Toshiba MS-DOS is required to run the DIAGNOSTICS PROGRAM.  To start the 
DIAGNOSTIC PROGRAM, follow these steps: 

1.  Insert the diagnostics diskette #1 in the floppy disk drive and turn on the computer.  (The 

diagnostics diskette contains the MS-DOS boot files.) And then follow the instructions to 
swap with the diagnostics diskette #2 for T&D program installed in RAM. 

The T&D Program can run by single test item when you press the corresponding letter of 

 

The test list is as follows: 

A.  CONFIG CHECK TEST 

ST 

 SYCARD TEST 

 CHARGE TEST 

ST 

ST 

 

EST 

a test item, or run two or more test items what you like if you choose them with “Arrow 
cursors” and “Space Bar” – You can also set a test loop by pressing the “Enter” button. It
will ask you if you want to copy the test log file to diskette as reference when the tests 
finish. 

B.  DMI CHECK TEST 
C.  PIO LOOPBACK TE
D.  RTC Test   
E.  32-BIT FOR
F.  SPEAKER AUDIO TEST 
G.  FAN ON/OFF TEST 
H.  MODEM TEST  
I.  MAIN BATTERY
J.  FDD TEST 
K.  CD-ROM TE
L.  KEYBOARD TE
M. MOUSE (PAD) TEST
N.  LCD PIXELS MODE T
O.  LID SWITCH TEST 
P.  HDD R/W TEST 
Q.  LAN TEST