Toshiba PSLE9X User Manual

Page of 248
4 Replacement Procedures 
4.7 Display Assembly 
4.8  Display Assembly 
Removing the Display Assembly 
CAUTION:  Use care to avoid that the antenna cable is not caught between the display 
assembly and computer.
 
Remove the display assembly according to the following procedures and Figures 4-14, 4-15.  
1.  Turn the computer so the back is facing you and remove two M2.5x7 black flat head 
screws. 
2.  Restore the normal computer placement and open the display panel. 
M2 5x7 black flat head screw
.
 
Figure 4-14 Removing the screws from the back of the computer 
3.  Disconnect the LCD/FL cable from CN5 on the system board. 
4.  Disconnect the CCD cable from CN7 on the system board. 
5.  Disconnect the MIC cable from CN3 on the system board. 
6.  Remove four M2.5x7 black flat head screws securing the LCD module to the bottom 
cover. 
7.  Remove the wireless antenna cables, CCD cable and MIC from the bottom cover. 
8.  Remove the display module.
4-30 
Satellite L350D/ Satellite Pro L350D/ EQUIUM L350D/ SATEGO L350D
 
Maintenance Manual