Toshiba NB205N330BL User Manual

User’s Manual

3-10

Getting Started

You can enter Sleep Mode in one of three ways:
1. Click Windows Start button, point to 

, and then click Sleep.

2. Close the display panel. This feature must be enabled. Refer to the 

Power Options in the Control Panel.

3. Press the power button. This feature must be enabled. Refer to the 

Power Options in the Control Panel.

When you turn the power back on, you can continue where you left when 

you shut down the computer. 

Sleep Mode will not function under the following conditions:

■

Power is turned back on immediately after shutting down.

■

Memory circuits are exposed to static electricity or electrical noise.

Certain conditions require that you reset the computer, for example if:

■

You change certain computer settings.

■

An error occurs and the computer does not respond to your keyboard 

commands.

If you need to restart the computer, there are two ways this can be 

achieved:
1. Click Start then click the arrow button 

 and select Restart from the 

menu.

2. Press CTRL, ALT and DEL simultaneously (once) to display the menu 

window, then click th arrow button in the lower right corner of the 

screen, then select Restart.

3. Press the power button and hold it down for five seconds. Once the 

computer has turned itself off, wait between ten and fifteen seconds 

before turning the power on again by pressing the power button.

You can also enable Sleep Mode by pressing FN + F3 - please refer to 

■

When the computer is in Sleep Mode, the Power indicator will blink 

■