Toshiba E200 User Manual

User’s Manual

4-41

Operating Basics

2. In the USB Sleep and Charge field within the Advanced tab, use 

F5/F6 key to change the settings.

3. Press the F10 key. Select Yes and then press the ENTER key to accept 

the changes. The computer will restart.

This utility can be used to enable and disable the USB Sleep and Charge 

function. Check the “Enable USB Sleep and Charge” check box. In the 

default state this function is disabled.

Your PC has multiple charging modes so that many different USB devices 

can be supported for USB Sleep and Charge function. Typical Mode 

(Default) is suitable for a wide range of digital audio players. 
However, determining which mode is suitable for your USB device is 

unknown without trying. Try each mode, using the following procedure, 

from Typical Mode to Alternate Mode(*1) to find the suitable mode for your 

USB device to charge.  
This function may not be able to be used with some connected external 

devices even if the appropriate mode is selected. In this situation, clear the 

“Enable USB Sleep and Charge” check box and stop using this function. 
*

1 

Some computers may not support all modes.

This utility can be used to specify the lower limit of remaining battery life for 

USB Sleep and Charge. Move the slider bar to specify the lower limit. If the 

remaining battery life falls below the setting, the “USB Sleep and Charge 

function” will be stopped. Unchecking the “Enable under Battery Mode” 

check box sets the utility to only charge when the AC adapter is connected.

To protect from overheating, the CPU has an internal temperature sensor. If 

the computer’s internal temperature rises to a certain level, the cooling fan 

is turned on or the processing speed is lowered. You can select whether to 

control the CPU temperature by turning on the fan first, then if necessary, 

lowering the CPU speed. Or, by lowering the CPU speed first, then if 

necessary, turning on the fan. These functions are controlled within the 

Power Options.
When the CPU temperature falls to a normal range, the fan is turned off 

and the CPU operation returns to standard speed.