Toshiba E200 User Manual

User’s Manual

4-25

Operating Basics

■

If you add data to a DVD-R, DVD-R DL, DVD+R or DVD+R DL disc that 

you have already recorded to, you might not be able to read the added 

data under some circumstances. For example, it cannot be read under 

16-bit operating systems, such as Windows 98SE and Windows Me, 

while in Windows NT4 you will need Service Pack 6 or later, and in 

Windows 2000, you will need Service Pack 2. In addition to this, some 

DVD-ROM and DVD-ROM/CD-RW drives cannot read this added data 

regardless of the operating system.

■

TOSHIBA Disc Creator does not support recording to DVD-RAM discs - 

to achieve this you should use Windows Explorer or another similar 

utility.

■

When you back up a DVD disc, be sure that the source drive supports 

recording to DVD-R, DVD-R DL, DVD-RW, DVD+R, DVD+R DL or 

DVD+RW media - if this is not the case then the source disc might not 

be backed up correctly.

■

When you back up a DVD-R, DVD-R DL, DVD-RW, DVD+R, DVD+R 

DL or DVD+RW disc, be sure to use the same type of disc.

■

You cannot partially delete any data written to a CD-RW, DVD-RW, 

DVD+RW disc. 

To verify that data has been written or rewritten correctly to a data CD/DVD 

you should follow the steps below before you begin the write/rewrite 

process:
1. Display the setting dialog box by one of the following two steps:

■

Click the Recording settings button ( 

 ) for writing on the main 

toolbar in the Data CD/DVD mode.

■

Select Settings for Each Mode -> Data CD/DVD in the Settings 

menu. 

2. Mark the Verify written data check box.
3. Select File Open or Full Compare mode.
4. Click the OK button.

Please refer to the Help files for additional TOSHIBA Disc Creator 

information.

You can record video using Corel DVD MovieFactory for TOSHIBA.

Simplified steps for making a Labelflash DVD: