Toshiba Portégé M200 User Manual
Optional Devices
Portégé M200
89
Portégé M200
Version
1
Last Saved on 03/11/2003 12:04
ENGLISH using Euro_M.dot –– Printed on 03/11/2003 as IM_M20EN
Removing memory module
To remove the memory module, make sure the computer is in boot mode
then:
then:
1. Save data, shutdown Windows and turn the power off.
2. Remove the AC adaptor cable and other cables from the computer.
3. Close the display panel and turn the computer over. Remove the
Battery Pack.
4. Remove a screw on the cover of the memory module slot.
Be careful that the removed screw will not be fallen into the memory
module slot.
module slot.
5. Push slightly outwards the latch tabs on both sides that secure the
memory module with a pen tip or other tools, and remove the memory
module.
module.
When the memory module rises obliquely, you can remove it from the slot.
LATCH
TABS
Removing the memory module
6. Reinstall the cover of the memory module slot. Fasten the screw you
removed in Step 4.
7. Reinstall the Battery Pack.
After installing a memory module, turn the power of the computer on to
see a total memory size. The system will calculate the total memory size.
see a total memory size. The system will calculate the total memory size.