Toshiba Portégé M200 User Manual

Page of 202
 
Operating Basics 
Portégé M200 
427 
Portégé M200
 Version   
1
   Last Saved on 03/11/2003 12:04 
ENGLISH using  Euro_M.dot –– Printed on 03/11/2003 as IM_M20EN 
Connecting 
To connect the internal modem cable, follow the steps below. 
The modular cable that comes with the computer must be used to 
connect a modem. Connect the end of the modular cable with the core to 
the computer. 
In case of a lightning storm, unplug the modem cable from the telephone 
jack. 
Do not connect the modem to a digital telephone line. A digital line will 
damage the modem. 
1.  Plug one end of the modular cable into the modem jack. 
2.  Plug the other end of the modular cable into a telephone jack. 
 
 
 
 
 
 MODEM 
JACK  
 
Connecting the internal modem 
Do not pull on the cable or move the computer while the cable is 
connected. 
If you use a storage device such as a CDROM drive or HDD connected to 
a 16bit PC card, you might experience the following modem problems: 
3.  Modem speed is slow or communication is interrupted. 
4.  Skip may occur in sound. 
Disconnecting 
To disconnect the internal modem cable, follow the steps below: 
1.  Pinch the lever on the connector in the telephone jack and pull out the 
connector. 
2.  Disconnect the cable from the computer in the same manner.