Toshiba M200 User Manual

When you turn off your computer with fully charged batteries, the batteries retain
data for the following approximate time periods:

Battery pack (4400 mAh)

7 days (Resume mode)
30 days (Boot mode)

RTC battery

1 month

To maximize the life of your Battery Pack:

❑

At least once a month, disconnect the computer from a power source and
operate it on battery power until the Battery Pack fully discharges. Before
doing so, follow the steps below.

1. Turn off the computer’s power.

2. Disconnect the AC adaptor and turn on the computer’s power. If it does not

turn on go to step 4.

3. Operate the computer on battery power for five minutes. If the Battery Pack

has at least five minutes of operating time, continue operating until the
Battery Pack is fully discharged. If the 

 indicator flashes or there is

some other warning to indicate a low battery, go to step 4.

4. Connect the AC adaptor to the computer and the power cord to a power

outlet. The 

 indicator should glow in green, and the 

should glow in orange to indicate that the Battery Pack is being charged. If
the 

 indicator does not glow, power is not being supplied. Check

the connections for the AC adaptor and power cord.

5. Charge the Battery Pack until the 

indicator glows in green.

❑

If you have spare Battery Packs, rotate their use.

❑

If you will not be using the system for an extended period, more than one
month, remove the Battery Pack.

❑

Disconnect the AC adaptor when the battery is fully charged. Overcharging
makes the battery hot and shortens life.

❑

If you are not going to use the computer for more than eight hours, disconnect
the AC adaptor.

❑

Store spare Battery Packs in a cool dry place out of direct sunlight.