Toshiba M200 User Manual

Result Codes:

n=0,1

Otherwise

Instructs the modem to exit on-line command mode and return
to data mode (see AT escape sequence, +++).

This command issues a retrain before returning to on-line data
mode.

This command issues a rate renegotiation before returning to
on-line data mode.

Result Codes:

n=0,1,3

Otherwise

This command configures the modem for pulse (non touch-tone)
dialing. Dialed digits are pulsed until a T command or dial modifier is
received. Tone dial is the default setting.

Result codes are informational messages sent from the modem and
displayed on your monitor. Basic result codes are 

, 

,

, 

, and 

. The ATQ command allows the

user to turn result codes on or off.

Enables modem to send result codes to the computer (de-
fault).

Disables modem from sending result codes to the computer.

Result Codes:

n=0,1

Otherwise