Toshiba M200 User Manual

Abort. Stops any test in progress.

Local analog loop. This test verifies modem operation, as well
as the connection between the modem and computer. Any
data entered at the local DTE is modulated, then demodulated,
and returned to the local DTE. To work properly, the modem
must be off-line.

Result Codes:

n=0

n=1

Otherwise

This command displays the current configuration of the modem. If
nonvolatile memory is supported the stored profiles are displayed
as well.

View profiles.

Saves the current (active) configuration (profile), including S-Regis-
ters.

The current configuration comprises a list of storable parameters
illustrated in the 

 command. These settings are restored to the

active configuration upon receiving a 

command or at power up.

Refer to the 

 command.

Stores the current configuration.

This command is used to store up to four dialing strings in the
modem’s nonvolatile memory for later dialing. The format for the
command is 

=“stored number” where n is the location 0-3 to which

the number should be written. The dial string may contain up to 34
characters. The ATDS=n command dials using the string stored in
location n.

Result codes:

n=0, 1, 2, 3

Otherwise