Toshiba M200 User Manual

This register sets the time, in seconds, that the modem must wait
before hanging up because carrier is not detected. The timer is started
when the modem finishes dialing (originate), or goes off-hook (an-
swer). In originate mode, the timer is reset upon detection of an answer
tone if allowed by county restriction. The timer also specifies the wait
for silence time for the @ dial modifier in seconds. S7 is not associated
with the W dial modifier.

Range: 1-255

Default: 50

Units:

seconds

This register sets the time, in seconds, that the modem must pause
when it encounters a comma (,) in the dial command string. In some
countries/regions, S8 will set both wait before dialing and comma
pause time.

Range: 0-255

Default: 2

Units:

seconds

This register determines the dialing speed which is prefixed for each
country/region.

Range: 50-255

Default: 95

Units:

.001 seconds

This register sets the value (in 20 millisecond increments) for the
required pause after the escape sequence.

Range: 0-255

Default: 50

Units:

.02 seconds