Toshiba M1 User Manual
3.15 CD-ROM/DVD-ROM Test
3 Tests and Diagnostics
TECRA M1 Maintenance Manual (960-436)
3-37
3.15 CD-ROM/DVD-ROM Test
To execute the CD-ROM/DVD-ROM test, select 13 from the DIAGNOSTICS TEST MENU, press
Enter and follow the directions on the screen. The CD-ROM/DVD-ROM test contains six Subtests
that test the computer’s CD-ROM/DVD-ROM functions.
Enter and follow the directions on the screen. The CD-ROM/DVD-ROM test contains six Subtests
that test the computer’s CD-ROM/DVD-ROM functions.
NOTE: Make sure the CD-ROM driver (CDRNEW.COM) is installed and insert the test
menu media CD (TOSHIBA CD-ROM TEST DISK (ZA1217P01/P000204190)). For the
DVD-DOM test, insert the media CD (Toshiba-EMI TEST DISK TSD-1).
menu media CD (TOSHIBA CD-ROM TEST DISK (ZA1217P01/P000204190)). For the
DVD-DOM test, insert the media CD (Toshiba-EMI TEST DISK TSD-1).
Subtest 01
Sequential Read
This Subtest is a sequential reading of one-block units (2K bytes) of all the logical
addresses.
addresses.
Subtest 02
Read Specified Address
This Subtest reads one-block data from a specified address.
Subtest 03
Random Address/Data
This Subtest reads one-block data and multi-block data from random addresses 200
times.
times.
Subtest 04
Playback Music (CD only)
NOTE: You cannot use the Toshiba-EMI DVD-ROM TEST DISK TSD-1 for Subtest 04. For
this test, use an ordinary music CD.
this test, use an ordinary music CD.
This Subtest reads track data from a specified track and plays the sound.
Subtest 05
RW 1 point W/R/C
This subtest performs the CD-RW drive test.
NOTE: For the CD-RW drive test, use CD-RW media that supports four-speed writing (media
manufactured by RICOH or Mitsubishi Chemical are recommended.)
manufactured by RICOH or Mitsubishi Chemical are recommended.)