Toshiba M300 Series User Manual

Page of 222
183
If Something Goes Wrong
If you need further assistance
Cannot use the “USB Sleep and Charge function.”
(Available on certain models)
The setting of “USB Sleep and Charge function” may be 
Disabled. Change the setting to Enabled.
Some external devices may not be able to use the “USB Sleep 
and Charge function”. In this case, please try one or more of 
the following methods.
Change the Enabled mode setting.
Turn OFF the computer while external devices are 
connected.
Connect external devices after turning OFF the computer. 
If this function cannot be used, change the setting to Disabled.
Make sure that you are connected to a compatible port.
The “USB Wakeup function” does not work.
When the “USB Sleep and Charge function” is Enabled in the 
TOSHIBA Hardware Setup, the “USB Wakeup function” does 
not work for ports that support the “USB Sleep and Charge 
function.” In that case, use a USB port that does not have the 
“USB Sleep and Charge function”-compatible icon (
) or 
disable the “USB Sleep and Charge function” in TOSHIBA 
Hardware Setup.
If you need further assistance
If you have followed the recommendations in this chapter and are 
still having problems, you may need additional technical assistance. 
This section contains the steps to take to ask for help.
Before you contact Toshiba
Since some problems may be related to the operating system or the 
program you are using, it is important to investigate other sources 
of assistance first.
Try the following before you contact Toshiba:
Review the troubleshooting information in your operating 
system documentation.
If the problem occurs while you are running a program, consult 
the program’s documentation for troubleshooting suggestions. 
Contact the software company’s technical support group for 
their assistance.