Toshiba PPM78U05L01E User Manual

Page of 258
User’s Manual
3-31
PORTÉGÉ M780
8. Seat the memory module cover in place and secure it with one screw.
Figure 3-15 Seating the memory module cover
9. Install the battery pack - refer to 
 section in 
, if required.
10. Turn your computer over.
11. Turn the computer on and make sure the added memory is recognized - 
to confirm it, click Start -> Control Panel -> System and Security -> 
System.
Removing a memory module (Slot B)
To remove the memory module, follow the steps as detailed below:
1. Set the computer to Boot Mode and turn its power off - make sure the 
Power indicator is off (refer to the 
 section in 
, if required).
2. Remove the AC adaptor and all cables and peripherals connected to 
the computer.
3. Close the display panel.
4. Turn the computer upside down and remove the battery pack (refer to 
 section in Chapter 6, 
, if required).
5. Loosen the screw securing the memory module cover in place - please 
note that this screw is attached to the cover in order to prevent it from 
being lost.
6. Slide your fingernail or a thin object under the cover and lift it off.
7. Push the latches away from the module in order to release it - a spring 
will force one end of the module up at an angle.
Take care to ensure that the memory module cover is firmly closed.
1. Screw
2. Memory module cover
1
2
Always make sure the display panel is closed in Laptop mode before 
turning the computer upside down.