Sony PCG-SR21K User Manual
Sony Not
e
book Us
er
G
u
id
e
Getting help
69
I cannot print
Check that all the cables of the printer are correctly connected.
Check that your printer is correctly configured and that you have up-to-date drivers. If needed, contact
your dealer.
your dealer.
The default setting for the printer port mode is correct for most printers. If you cannot print, try
changing the printer port mode. In Sony Notebook Setup, select the Printer tab. If the printer port
mode is set to ECP, change it to bi-directional. If the printer port mode is set to bi-directional, change it
to ECP.
changing the printer port mode. In Sony Notebook Setup, select the Printer tab. If the printer port
mode is set to ECP, change it to bi-directional. If the printer port mode is set to bi-directional, change it
to ECP.
The i.LINK device, which is connected to the computer, is not recognized, or a message appears
Disconnect the i.LINK
TM
device once, then connect it again.
About digital video captures and DVgate
While I am recording images to a digital video device using DVgate, my system displays the message
'Recording to DV device failed. Check the power and cable connections to the DV device and try the
operation again'
'Recording to DV device failed. Check the power and cable connections to the DV device and try the
operation again'
Close all open applications and restart your computer. Frequent recording of images to a digital video device
while using DVgate sometimes causes this error.
while using DVgate sometimes causes this error.