Sony PCG-R600HEK User Manual
Sony Not
e
book Us
er
G
u
id
e
Getting help
79
3
Set the i.LINK network switch on the bottom of the docking station to the unmarked side with a thin
pen tip.
pen tip.
4
Connect the docking station to your notebook.
5
Turn on your notebook.
You can now operate the CD-RW/DVD-ROM drive or the DVD-ROM drive.
You can now operate the CD-RW/DVD-ROM drive or the DVD-ROM drive.
Do not set the i.LINK network switch when the notebook is on. It causes malfunction.
Set the i.LINK network switch after removing all cables connected to the docking station.
I cannot operate the CD-RW/DVD-ROM drive or the DVD-ROM in the docking station connected to the
notebook when the notebook is connected to another computer by means of an i.LINK cable
notebook when the notebook is connected to another computer by means of an i.LINK cable
Set the i.LINK
TM
network switch on the bottom of the docking station to the on position. See ‘Connecting
two VAIO notebooks’.
I cannot remove the disk inserted in the drive
You cannot remove disks when the computer is in a power saving mode. Return to normal mode and then
press the eject button.
press the eject button.
The disk tray does not eject even when the eject button is pressed
Open the tray by inserting a sharp, pointed object in the manual eject hole.
When I disconnect the docking station, a warning message appears
Close all open applications and disconnect the peripheral devices, then disconnect the docking station by
following the procedure in ‘Disconnecting your computer from the docking station’.
following the procedure in ‘Disconnecting your computer from the docking station’.