Sony PCG-Z505HS Manual
Adding Memory
61
To install a memory module
1
Shut down your computer and disconnect all peripheral devices,
such as your printer.
such as your printer.
2
Unplug the computer and remove the battery packs.
3
Wait until the computer cools down. Then unscrew the five screws
with the
with the
●
mark on the bottom of your computer.
4
Slide the LCD lock lever and lift the cover. Slide the keyboard toward
the LCD display, then lift it away slightly.
the LCD display, then lift it away slightly.
5
Lift the keyboard from the LCD display side, then gently turn it over
on the space where the touchpad is. Be careful not to detach the cable
when lifting the keyboard.
on the space where the touchpad is. Be careful not to detach the cable
when lifting the keyboard.
6
If you are adding memory to the PCG-Z505HS, you must remove the
existing memory module. Follow the instructions in “To remove a
memory module” on page 62.
existing memory module. Follow the instructions in “To remove a
memory module” on page 62.
7
Remove the memory module from its packaging.
8
Install the memory module. Be careful not to touch the other
components of the motherboard.
components of the motherboard.