Sony PCG-F570 Manual
Using Power Saving Modes
"#
System Suspend Mode
The computer saves the current state of the system in RAM and switches
off power to the CPU. The umber power indicator light flashes in this
mode.
off power to the CPU. The umber power indicator light flashes in this
mode.
To activate System Suspend mode
Press Fn+Esc, or press the power button and release it immediately. You
can also use the PowerPanel utility to enter System Suspend mode.
can also use the PowerPanel utility to enter System Suspend mode.
To return to normal mode
Press any key.
System Hibernation Mode
The state of the system is saved on the hard drive and power is turned off.
The power indicator light is off in this mode.
The power indicator light is off in this mode.
To activate System Hibernation mode
Press Fn+F12. The “Save to Disk Manager” screen appears, and then the
computer enters System Hibernation mode. You can also use the
PowerPanel utility to enter System Hibernation mode.
computer enters System Hibernation mode. You can also use the
PowerPanel utility to enter System Hibernation mode.
To return to normal mode
Turn on the computer by pressing the power button. The computer
returns to its previous state.
returns to its previous state.
❑
Time to return to normal mode
System Idle requires less time than System Suspend, and System
Suspend requires less time than System Hibernation.
System Idle requires less time than System Suspend, and System
Suspend requires less time than System Hibernation.
❑
Power consumption
System Idle uses more power than System Suspend, and System
Suspend uses more power than System Hibernation.
System Idle uses more power than System Suspend, and System
Suspend uses more power than System Hibernation.
✍
When returning from System Hibernation mode, the system status stored on the hard disk is
erased and the computer starts normally if you press the power button and hold for more
than four seconds.