Sony PCG-XG700K User Guide
VAIO Notebook User Guide
68
Removing the Optional Hard Drive
(PCGA-HDX10)
(PCGA-HDX10)
Windows Me models
1
Right-click the Power Management icon
in the system task tray and
select “Remove multipurpose bay device”. The Device Swapping message
appears.
appears.
2
Slide the Release lever on the bottom of the unit in the direction of the arrow
and hold while sliding the device out of the multipurpose bay.
and hold while sliding the device out of the multipurpose bay.
3
Click OK.
Windows 2000 models
1
Double-click
in the system task tray. The Unplug or Eject Hardware
dialog box appears.
2
In the Unplug or Eject Hardware dialog box, select the appropriate device,
and then click Stop.
and then click Stop.
3
Confirm the device and click OK.
4
A message appears informing you that the device can now be safely removed
from the system.
from the system.
5
Slide the RELEASE lever on the bottom of the computer in the direction of
the arrow and then unplug the drive from the computer.
the arrow and then unplug the drive from the computer.
✍
When the computer is in power saving mode, you cannot remove the hardware device.
✍
While using the optional hard drive (PCGA-HDX10) in the multipurpose bay, do not put
the system into power saving mode. Power saving mode may not work properly and
unsaved data may be lost.
the system into power saving mode. Power saving mode may not work properly and
unsaved data may be lost.