Sony PCG-F580K Manual
VAIO® Notebook User Guide
%"
My mouse does not work
❑
❑
If you are using an external mouse, check that the mouse is plugged
into the mouse connector. See “Connecting an External Mouse or
Keyboard” on page 62 for details.
into the mouse connector. See “Connecting an External Mouse or
Keyboard” on page 62 for details.
❑
If you connected an external mouse while your computer is on, you
must restart your computer.
must restart your computer.
❑
If you are using an optional Sony USB mouse PCGA-UMS1, check
that the mouse is plugged into the USB connector.
that the mouse is plugged into the USB connector.
My touchpad does not work
You may have disabled the touchpad while no mouse was connected to
the computer. If so, you must enable the touchpad using Sony Notebook
Setup.
the computer. If so, you must enable the touchpad using Sony Notebook
Setup.
I cannot use DV devices. The message DV equipment seems to be
disconnected or turned off appears.
❑
❑
Check that the DV device is turned on and that the cables are
properly connected.
properly connected.
❑
If you are using multiple i.LINK® devices, the combination of the
connected devices may cause unstable operation. In this case, turn off
the power to all connected devices and disconnect unused devices.
Check the connection, then turn on the power again.
connected devices may cause unstable operation. In this case, turn off
the power to all connected devices and disconnect unused devices.
Check the connection, then turn on the power again.
My touchpad interprets a single tap as a double-click
Click the Mouse icon in the Control Panel and then change the button
assignments in the Mouse Properties dialog box. One of the buttons is
assigned to the double-click action.
assignments in the Mouse Properties dialog box. One of the buttons is
assigned to the double-click action.
My computer does not shut down
It is best to shut down your computer using the Shut Down command on
the Windows Start menu. Using other methods, including those listed
here, may result in loss of unsaved data. If the Shut Down command does
not work properly, follow these steps:
the Windows Start menu. Using other methods, including those listed
here, may result in loss of unsaved data. If the Shut Down command does
not work properly, follow these steps:
❑
Restart the computer by pressing Ctrl+Alt+Delete. If this does not
work, press the power button and hold it for at least four seconds to
turn off the power.
work, press the power button and hold it for at least four seconds to
turn off the power.
❑
Unplug the computer from the AC adapter and remove the battery
pack from your computer.
pack from your computer.