Sony PCG-F160 User Guide

You can connect a digital video camera recorder to the S200 i.LINK™ 

 

(IEEE 1394) connector.

To connect a digital video camera recorder
❑

Plug one end of the i.LINK cable (not supplied) into the i.LINK 
connector on the left side of the computer and the other end into the 
DV In/Out connector on the digital video camera recorder.

✍

The Sony digital video camera recorder (DCR-PC7) is pictured; you may need to connect 
your camera differently.

On Sony digital video cameras, connectors labeled “DV In/Out” or “i.LINK” are i.LINK-
compatible. 

See the manual that came with your digital video camera recorder for more information on 
installation and use.

Do not connect more than one digital video camera at a time. The software supplied with 
your computer will not recognize multiple cameras.

The i.LINK connector on the computer does not supply power to external devices. If the 
external device requires power from the i.LINK connector, you cannot use the device with 
the computer.

The computer supports transfer rates up to 200 Mbps; however, the actual transfer rate is 
the lowest transfer rate of the external device.

The i.LINK features available may vary depending on the software applications you use. See 
the documentation that came with your software for more information.