Panasonic TH-L32XM5T User Manual

Page of 16
 Attaching / removing the pedestal
Warning
Do not disassemble or modify the pedestal.
• 
Otherwise the TV may fall over and 
become damaged, and personal injury may 
result.
Caution
Do not use any pedestal other than that 
provided with this TV.
• 
Otherwise the TV may fall over and 
become damaged, and personal injury may 
result.
Do not use the pedestal if it becomes 
warped or physically damaged.
• 
If you use the pedestal while it is physically 
damaged, personal injury may result. 
Contact your local Panasonic dealer 
immediately.
During set-up, make sure that all screws are 
securely tightened.
• 
If insufficient care is taken to ensure screws 
are properly tightened during assembly, 
the pedestal will not be strong enough to 
support the TV, and it might fall over and 
become damaged, and personal injury may 
result.
Ensure that the TV does not fall over.
• 
If the TV is knocked or children climb 
onto the pedestal with the TV installed, the 
TV may fall over and personal injury may 
result.
Two or more people are required to install 
and remove the TV.
• 
If two or more people are not present, the 
TV may be dropped, and personal injury 
may result.
When removing the pedestal from the TV, 
do not remove the pedestal by the methods 
other than the specified procedure.   (p. 3)
• 
Otherwise the TV and / or pedestal may fall 
over and become damaged, and personal 
injury may result.
Assembly 
screw (4) 
(black)
 
Assembly 
screw (4) 
(black)
 
Bracket
•  TBL5ZA33121
 
Base
•  TBL5ZX04881
1  Assembling the pedestal
C
D
A
Front
Use the assembly screws 
 to fasten the 
bracket 
 to the base 
 securely.
• 
Make sure that the screws are securely 
tightened.
• 
Forcing the assembly screws the wrong way 
will strip the threads.
2  Securing the TV
B
Arrow mark
Hole for pedestal 
installation
Use the assembly screws 
 to 
fasten securely.
• 
Tighten the four assembly 
screws loosely at first, then 
tighten them firmly to fix 
securely.
• 
Carry out the work on a 
horizontal and level surface.
 Removing the pedestal from the TV
Be sure to remove the pedestal in the following way when using the 
wall-hanging bracket or repacking the TV.
1  Remove the assembly screws 
 from the TV.
2  Pull out the pedestal from the TV.
3  Remove the assembly screw 
 from the bracket.
Preventing the TV from falling over
Using the fall-prevent screw hole and a 
screw (commercially available), securely fix 
the body of the pedestal to the installation 
surface.
• 
Th
  e place where the pedestal is to be fi xed 
should be thick enough and made of hard 
material.
Screw
hole
Screw (not supplied)
Diameter: 3 mm
Length: 25 - 30 mm
3
Rear of the TV
Holes for wall-hanging 
bracket installation
100 mm
200 mm
Depth of screw: 
m inimum 11 mm 
m aximum 17 mm
Screw Thread Type: M4
Screw for fixing the TV 
onto the wall-hanging 
bracket (not supplied with 
the TV)
[View from the side]
Wall-hanging bracket (Optional) 
Please contact your local Panasonic dealer to 
purchase the recommended wall-hanging bracket. 
For additional details, please read the manual of the 
optional accessories.
WARNING
• 
Failure to use a Panasonic bracket or choosing to mount 
the unit yourself will be done at the risk of the consumer. 
Always be sure to ask a qualified technician to carry out 
set up. Incorrect fitting may cause equipment to fall, 
resulting in injury and product damage. Any damage 
resulting from not having a professional installer mount 
your unit will void your warranty.
• 
When any optional accessories or wall hanging brackets 
are used, always ensure that the instructions provided are 
followed fully.
• 
Do not mount the unit directly below ceiling lights (such 
as spotlights or halogen lights) which typically give off 
high heat. Doing so may warp or damage plastic cabinet 
parts.
• 
Take care when fixing wall brackets to the wall. Wall 
mounted equipment shall not be grounded by metal 
within the wall. Always ensure that there are no electrical 
cables or pipes in the wall before hanging bracket.
• 
To prevent fall and injury, remove the TV from its fixed 
wall position when it is no longer in use.
TY-WK3L2RW
• 
Th
  e angle of wall-hanging bracket can 
be adjusted in “zero tilting (vertical)” 
and “5 or 10-degree tilting” for this TV.
TH-L32XM5KMTX_fold_EN.indd   3
TH-L32XM5KMTX_fold_EN.indd   3
6/1/2012   8:26:07 AM
6/1/2012   8:26:07 AM