Alienware 17 R1 User Manual
Replacing the Wireless Mini-Card |
33
Replacing the Wireless Mini-Card
WARNING:
Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
For more safety best practices, see the Regulatory Compliance
home page at dell.com/regulatory_compliance.
"Before Working Inside Your Computer" on page 11. After working
inside your computer, follow the instructions in "After Working Inside
Your Computer" on page 13.
For more safety best practices, see the Regulatory Compliance
home page at dell.com/regulatory_compliance.
Procedure
CAUTION:
To avoid damage, never place cables under the
wireless mini-card.
1
Align the notch on the wireless mini-card with the tab on the mini-card connector.
2
Slide the wireless mini-card, at a 45-degree angle, into the mini-card connector.
3
Press the other end of the wireless mini-card down and replace the screw that
secures the wireless mini-card to the system board.
secures the wireless mini-card to the system board.
4
Connect the antenna cables to the wireless mini-card.
The following table provides the antenna-cable color scheme for the wireless
mini-card supported by your computer.
Postrequisites
1
2
Replace the base cover. See "Replacing the Base Cover" on page 15.
Connectors on the wireless mini-card
Antenna-cable color
Main WLAN + Bluetooth (white triangle)
white
Auxiliary WLAN + Bluetooth (black triangle)
black
book.book Page 33 Friday, June 28, 2013 3:27 PM