Insignia NS-PU98635-C Leaflet

Thank you for purchasing this high quality Insignia USB 3.0 to Gigabit 
Ethernet Adapter. Use this adapter to instantly connect to a 1000 Mbps 
network from the USB 3.0 port on your desktop or laptop computer. 

•  USB to Ethernet Adapter
• Driver 

CD

•  Quick Setup Guide 

•  Windows® 8.1, Windows® 8, Windows® 7, Windows Vista®
 OR
  Mac OS 10.4.X or higher
• Available 

USB 

port

Note: The driver software must be installed before you connect the adapter. 
The adapter does not need to be connected for the software to install. If the 
computer has Windows 8.1, you do not need to install the driver from the disc. 
The drivers are installed automatically.

To install on a Windows PC:
1  Insert the driver CD into your computer’s disc drive. The installation 

wizard should open. 

  Note: If the wizard does not run automatically, locate and double-click 

Run.exe on the driver CD. 

2  Click on your operating system, then follow the on-screen 

instructions. 

Quick Setup Guide  I  

NS-PU98635/NS-PU98635-C

Before using your new product, please read these instructions to prevent any damage.

RTUNICv1.0.8.pkg

3  When installation is complete, click Finish, then restart your 

computer.

4  Connect the USB connector on the adapter to an open USB port on 

your computer.

5  Connect a network cable to the Ethernet port on the adapter.

To install on a Mac:
1  Insert the driver CD into your computer’s disc drive. 
2  In the Finder, select RTUNICv1.0.8 under DEVICES, then open 

RTUNICv1.0.8.pkg. The driver setup wizard opens.